| Customization: | Available |
|---|---|
| Material: | CPVC |
| Hardness: | Hard Tube |
|
Still deciding? Get samples of US$ 0/Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Jiangsu Huasheng Plastic Co., Ltd is one of the biggest PVC manufacturers in water supply field which has powerful abilities both in opening model and R&D
- High Heat Resistance:allows transportation of hot liquid and high temperature chemicals below 93 degree celsius
- Corrosion resistance: relatively inert with many chemicals
- Heat insulation properties: 1/360 of steel pipes
- Smooth wall surface: reduce invasion of microbes and other foreign particles
- Compliance with the dissolution test: no effect on water quality
- Electrical insulation properties: suitable for using as high voltage electrical power-lines
- Cold bonding of cement allows simple and economical installation
Product Details
| Standards of CPVC Testing Material | ||
| Index Name | Unit | Index |
| Density | kg/m3 | 1450-1650 |
| Vicat Softening Temperature | ºC | >=110 |
| Vicat Softening Temperature(Fittings) | ºC | >=103 |
| Longitudinal Reversion | % | <=5 |
| Chlorine Concerntration(Mass Percent) | % | >=60 |
| Hydrostatic Test | -- | No leafing,no break |
| Hydrostatic Reheat Test | -- | |
| Drop Impact Test | -- | TIR<=10% |
| Oven Test | Cal/g/ºC | No lamination,no crack |
| Modulus of Elasticity | MPa | >=2660 |
| Tensile Strength | MPa | >=56 |
| Impact Strength | KJ/m2 | >=16 |
| Coefficient of Linear Expansion | m/mºC | 3.4×10-5 |
| Thermal Conductivity | Cal/g/ºC | 0.14 |
| Specific Heat | Cal/g/ºC | 0.14 |
| Bulk Resistance | Ω/cm | >=1015 |
| Dielectric Strength | AC,KV/mm | 13 |
| Flame Retardant | -- | Self-extinguish |
| (DIN)CPVC Pipes For Industry | ||||
| Nominal outside diameter Dn | en nominal wall thickness en | |||
| S pipe series | ||||
| S10 | S6.3 | S5 | S4 | |
| SDR Standard Size Ratio SDR | ||||
| SDR21 | SDR13.6 | SDR11 | SDR9 | |
| 20 | 2.0(0.96)* | 2.0(1.5)* | 2.0(1.9)* | 2.3 |
| 25 | 2.0(1.2)* | 2.0(1.9)* | 2.3 | 2.8 |
| 32 | 2.0(1.6)* | 2.4 | 2.9 | 3.6 |
| 40 | 2.0(1.9)* | 3.0 | 3.7 | 4.5 |
| 50 | 2.4 | 3.7 | 4.6 | 5.6 |
| 63 | 3.0 | 4.7 | 5.8 | 7.1 |
| 75 | 3.6 | 5.6 | 6.8 | 8.4 |
| 90 | 4.3 | 6.7 | 8.2 | 10.1 |
| 110 | 5.3 | 8.1 | 10.0 | 12.3 |
| 125 | 6.0 | 9.2 | 11.4 | 14.0 |
| 140 | 6.7 | 10.3 | 12.7 | 15.7 |
| 160 | 7.7 | 11.8 | 14.6 | 17.9 |
| 180 | 8.6 | 13.3 | - | |
| 200 | 9.6 | 14.7 | - | - |
| 225 | 10.8 | 16.6 | - | - |
| 250 | 11.9 | 18.4 | - | - |
| 280 | 13.4 | 20.6 | - | - |
| 315 | 15.0 | 23.2 | - | - |
| 355 | 16.9 | 26.1 | - | - |
| 400 | 19.1 | 29.4 | - | - |
| Note:Considering the request of stiffness,the minimum wall thickness marked with "*"size added to 2.0mm.Use the wall thickness in parenthesis when calculating the hydrostatic test pressure. | ||||
){kind=link}